Share this link

    Home / Tradeshift Documentation / Tradeshift Partner Apps / Babelway / Chapter 4. Channels

    Extra processings on message definition OUT

    1791 0 Created on 2021-01-26 11:58:47; Last updated on 2022-07-01 13:01:37

    How to reach Extra Processing

    Click on "More details" in the Message OUT as shown:

    mceclip0.png

    Properties of Message Out

     Now you can reach the Extra Processing as shown:

    mceclip1.png

    Extra Processing


    Xslt transformer

    Applies an xslt to correct your message. It is applied on the internal xml representation of the message (before the message is converted to the output format).

    Be aware that the output of your transformation must be compatible with the internal representation of Babelway for this message format.

    The parameters are :

     Xslt 

     The transformation that must be applied. 


    Document extractor

    Allows you to extract any information in the output message to be able to view it directly in the monitor page.

    As an example, suppose that you want to extract some information from the output message to be able to view it directly in the monitor page.

    First, create the "Document type" you want to use from "Admin / Environment settings / Document types".

    Based on the information you want to store, you will need to create its corresponding document type, as shown below.

    mceclip2.png
     
     
     
    mceclip3.png

    Document types


    Note: For more information about the Document types you can check this link Document types.

    Then, create this extra processing in the "Message Out" and after that click on "Edit" to map the fields you want to extract, as shown below.

    mceclip4.png

    Extra processings


    After that, begin mapping the fields from the input message you want to extract to the fields in this document type, as shown below.

    mceclip5.png

    Mapping


    To be able to view the extracted information, go to monitoring and then based on the "name of the document you used" ("orders" in this case), click on it to view the extracted information, as shown below.

    mceclip6.png

    Monitoring


    Note: In order for the new document type to be displayed in the Monitoring page after using it in it's corresponding channel or channels you will need to deploy your environment in order to push this changes to production and the new document will be displayed in the Monitoring page, as shown below.

    mceclip7.png

    Deploy your environment


    Line delimiter converter

    Converts all line delimiters to the line delimiter that you choose. The original file can have its line delimiters in any style (Unix, Windows, Mac).

    The parameters are:

     Line delimiter 

     The line delimiter that you want to use in your output file. 

    Note: The line delimiter for Unix / OSX is \n, The line delimiter for Windows is \r\n, The line delimiter for Mac is \r.


    Xml Signer

    Signs an Xml.

    The parameters are:

     Key alias 

     Alias of the key (in your keystore) that will be used to sign the Xml. 

     Digest method 

     The digest method that will be used during the signature of the Xml. 

     Signature Method 

     The signature method that will be used to sign the Xml. 

     Signature transformation 

     The transformation that will be used to sign the Xml. 

     You have the choice between an inclusive Canonicalization or an enveloped signature. 

     Xpath to the target   node's URI 

     The Xpath that will allow the extraction of the URI of the root node of the subtree that needs to be signed. If not defined, the whole xml   document will be signed. 


    Pdf wrapping

    Allows you to create a pdf that will contain your output file in attachment.

    The parameters are:

     Pdf from   template 

     The template that will be used to create and contain the pdf. There are 4 possibilities: 

    • You directly provide a pdf file. This pdf file will be used as it is, and the extra processing will just add the requested pdf attachments. 

    • You provide an xhtml template for the pdf. This template will be converted into a pdf. This option can be useful if you want to use some metadata in your pdf template (current date, ...). 

    • In the parameter 'Pdf from metadata', You provide the name of a metadata containing the pdf you want to use. This metadata must have been populated earlier in the process of the message. 

    • You don't provide any file. A default (empty) pdf template will be used. This option can for example be useful if the pdfWrapper is only used to benefit from the pdf digital signature functionality. 

     Pdf from   metadata 

     The name of the metadata containing the pdf. This metadata must have been populated earlier in the process of the message, for instance by   extracting it from a zip file. 

     File name 

     The name that your output file will have in the pdf. 

     File   description 

     The description that your output file will have in the pdf. 

     Attachments 

     Other files that must be added to the pdf. For each individual file, you will have to state the name that the file will have in the pdf, and the name of   the metadata that contains the content. 


    Pdf resizer

    Allows you to resize an output pdf.

    The parameters are:

     Page size 

     The page size requested for the new pdf (A4, A5, LETTER, ...). The default is A4. 

     Offset X 

     Specifies the zone in the input pdf that will be copied to the output pdf. The default is 0. 

     Offset Y 

     Specifies the zone in the input pdf that will be copied to the output pdf. The default is 0. 

     Position X 

     Specifies where the zone copied from the input pdf will be placed on the page in the output pdf. 

     Position Y 

     Specifies where the zone copied from the input pdf will be placed on the page in the output pdf. 

     Scale X 

     Specifies the zoom ratio that must be applied when copying requested zones from the input to the output pdf. The default is 1. 

     Scale Y 

     Specifies the zoom ratio that must be applied when copying requested zones from the input to the output pdf. The default is 1. 


    Pdf Letterhead

    Allows you to set a letterhead to your output pdf file.

    The parameters are:

     Letterhead   pdf 

     The pdf file that contains the letterhead. 

     Page   order 

     When the letterhead pdf contains multiple pages, it tells you which page of the letterhead must be used for every page of the output pdf file. The   possible values are described hereafter. For every value, we also show as an example the result of the association for an output pdf file that would   contain 5 pages (1, 2, 3, 4 and 5) and a letterhead pdf that would contain 2 pages (A, B). 

    • Match forward. Repeat last page. Starting from the first page, all pages of the two pdfs are used together. If the output pdf has more pages than the letterhead model, the last page of the letterhead is used for all the subsequent pages. In our example, it would give the following result : 1:A, 2:B, 3:B, 4:B, 5:B. 

    • Match backward. Repeat first page. starting from the last page, all pages of the two pdfs are used together. If output pdf has more pages that the letterhead model, the first page of the letterhead is used for all the previous pages. In our example, it would give the following result : 1:A, 2:A, 3:A, 4:A, 5:B. 

    • Repeat all pages. All pages of the letterhead are repeated until the end of the output pdf. In our example, the following result would be: 1:A, 2:B, 3:A, 4:B, 5:A. 


    Pdf Appendix

    Allows you to add extra pages to your output pdf file.

    The parameters are:

     Pdf to add 

     The pdf file that wil be appended at the end of the existing pdf. 


    Add attachments to a pdf

    Allows you to add attachments to your output pdf file.

    The parameters are:

     Files to   add 

     The attachments that must be added to the pdf. For every attachment, you have to state the name that the file will have in the pdf, and the name of the   metadata that contains the content. 


    PdfA converter

    Transforms a pdf to make it PDFA1B compliant.


    Pdf signer

    Allows you to sign your output pdf file.

    The parameters are:

     Key alias 

     Alias of the key (in your keystore) that will be used to sign the pdf. 

     Pdf password 

     The password of your pdf (if your pdf is secured by a password). 

     Reason 

     Text that will be associated to the signature. 

     Show signature ? 

     Allows you to add an image to your pdf to show the signature. 

     Signature lower left X 

     Position (lower left X) where the signature image will be displayed. Only if you choose to show the signature. 

     Signature lower left Y 

     Position (lower left Y) where the signature image will be displayed. Only if you choose to show the signature. 

     Signature upper right X 

     Position (upper right X) where the signature image will be displayed. Only if you choose to show the signature. 

     Signature upper right Y 

     Position (upper right Y) where the signature image will be displayed. Only if you choose to show the signature. 

     Signature image 

     Image used to show the signature. Only if you choose to show the signature. 

     Timestamp method 

     Allows you to timestamp your output pdf. 

     Timestamp authority url 

     If you choose the external as timestamp method, the url to be called for the timestamping. 

     Timestamp authority login 

     If you choose the external as timestamp method, the optional login to use for the call. 

     Timestamp authority password 

     If you choose the external as timestamp method, the optional password to use for the call. 


    Zip wrapping

    Allows you to wrap your output file from a zip. It also allows you to add other files in the zip.

    The parameters are:

     File   name 

     The name that your output file will have in the zip. 

     Other files 

     Other files that must be added to the zip. Metadata = Pattern to match the metadata containing the file to attach. Filename = name of the file in the zip. If one   pattern matches multiple files, it is possible to put them all, if you guarantee to generate a different filename name for each one. This can be achieved by   using the capturing groups of the regex in the filename. Ex: if your metadata pattern is attachment-(.*) and your filename is \1, processing with two metadata   attachment-file1.csv and attachment-file2.csv will result in files, file1.csv and file2.csv. 

     
    Note: In Babelway, we're using the standard Java version of REGEX, and it's the same used all over the system.

    PGP wrapping

    Allows you to encrypt a file using PGP.

    PGP supports message authentication and integrity checking. The latter is used to detect whether a message has been altered since it was completed (the message integrity property) and the former to determine whether it was actually sent by the person or entity claimed to be the sender (a digital signature). Because the content is encrypted, any changes in the message will result in failure of the decryption with the appropriate key. The sender uses PGP to create a digital signature for the message with either the RSA or DSA algorithms. To do so, PGP computes a hash (also called a message digest) from the plaintext and then creates the digital signature from that hash using the sender's private key.

    The parameters are:

     PGP   public   Key 

     Public key to be used to encrypt the message. Babelway supports RSA and El Gamal encryption keys. 

     Output   in ascii 

     If checked, the PGP output follows the Ascii armored format. If not, the output is in binary. 

     ASCII armored format is a binary-to-textual encoding converter. ASCII armored format is a feature of a type of encryption called pretty good privacy   (PGP). ASCII armor involves encasing encrypted messaging in ASCII so that they can be sent in a standard messaging format such as email. 


    MIME wrapping

    Allows you to wrap your output message in a MIME envelop.

    The parameters are:

     File name 

     The name that your output file will have in the MIME envelop. 

     Content type 

     The content type that will be associated to your output file in the MIME envelop. 

     Other Files

     Other files that must be added to the MIME envelope. Metadata = Pattern to match the metadata containing the file to attach. Filename = name of the attachment in the MIME envelope. If one pattern matches multiple files, it is possible to put them all, if you guarantee to generate a different filename name for each one. This can be achieved by using the capturing groups of the regex in the filename. Ex: if your metadata pattern is attachment-(.*) and your filename is \1, processing with two metadata attachment-file1.csv and attachment-file2.csv will result in files, file1.csv and file2.csv. 

     Sign Message

     Sign the generated MIME envelope. 

     Signature key   alias 

     The alias of the key (in the keystore of your environment) that will be used to generate the signature. 

     Encrypt Message

     Encrypt the generated MIME envelope whether it is signed or not. 

     Partner key   alias 

     The alias (in the keystore of your environment) of your partner's certificate. It will be used to crypt the S/MIME message. 


    Replacement based on regular-expressions.

    Allows you to make a global search and apply regular-expression replacements on your output file.

    You can define more than one pair of regular-expressions, find & replace pattern.

    The parameters are:

     Replacements 

     List of regular expressions and replacement patterns that will be applied on your document for every match. 


    Create messages from metadata

    Allows you to create new messages, with content from current metadata.

    The parameters are:

     Target   gateways 

     The gateways to which the new message will be sent. 

     Metadata   and   names 

     Metadata containing content for messages to create. Metadata = Pattern to match the metadata that contains the contents for new messages. Filename   = fileName of the new messages. If one pattern matches multiple metadata, a new message will be generated for each metadata. You can use the   capturing groups of the regex in the filename. E.g.: if your metadata pattern is attachment-(.*) and your filename is \1, processing with two metadata   attachment-file1.csv and attachment-file2.csv will result 2 new messages files file1.csv and file2.csv. 

     User   Metadata   Transfer   Strategy 

     The strategy that will be used to transfer the user metadata to the new message created in the connected gateways. 

    Note:

    • This extra processing is not executed while running a test case.
    • In Babelway, we're using the standard Java version of REGEX, and it's the same used all over the system.

    Message Validation (Deprecated)

    Allow you to validate a message against a metadata.

    The parameters are:

     Fail on error 

     Create an error if the message is not valid. 

     Set status on error 

     If 'Fail on error' is not selected, this puts the message in error without creating a ticket. 

     Metadata name 

     Name of the metadata containing the expected result. 

     Regex to ignore 

     List of regular expressions to ignore. 

     Date to ignore 

     List of date format expressions to ignore. Dates are expressed using the regular java format like : yyyyMMddhhmmss. 

     
    Note: In Babelway, we're using the standard Java version of REGEX, and it's the same used all over the system.

    Automatically close errors

    This extra-processing allows to define criteria to automatically close an error that occurs during the message definition OUT step.

    The parameters are :

     Error message patterns 

     The patterns that will be tested against the error message. 

     If the error message matches at least one of the patterns, the status of the message will automatically be set to Error(closed). 

    

    0 people found this helpful.

    Related Articles